Occasionally referred to as Rrod, the Red ring of death can be a hardware failure in the Xbox 360 and is indicated by 3 red lights or rings near the power button. The most important reason for the failure is the loosening of GPU the graphic processing board on motherboard. Probable factors are motherboard heat up and vibration causing to loosen up the GPU. If the faulty Xbox is in warranty period you’ll be able to get it repaired from Microsoft however it will roughly take about two months. It is a long time! Isn’t it? And if not on warranty even then you’ll be able to get it repaired from Microsoft but besides waiting for about two months you also have to pay $140. So if you would like to have Red ring of death error fixed in round about 2 hours and totally absolutely free of price do adhere to the preceding paragraphs.
We have gathered some info about the famous red ring of death error, we now will start off to construct a total set of procedures in a ways to fix the Red ring of death error, format. Following few steps has been evolved to assist a novice to rectify the error without requiring advanced abilities and information.
1- Opening Xbox 360 Case
The very first step in fixing the Red ring of death error is opening the case. Employing fine tip screwdriver, open the plastic casing by poking in the screw driver into the holes. Then unscrew the front faceplate and get rid of it.
2- Motherboard Secure removal
Gently unplug all cables and get rid of devices attached with mother board. Once it can be carried out also get rid of the DVD drive. Now take out the motherboard along with fans out of the Xbox 360 case.
3- Disassembling Motherboard
While you might be carried out with motherboard removal turn it other way round and you will uncover an X-clamp under the heat sink. To snoop off the X-clamp use the screwdriver pretty carefully.
4- Heat Sink Removal.
Now unscrew the heat sink and you will have access to the GPU and CPU. As it can be one of the most sophisticated parts and wrong procedure can lead to permanent damage to your Xbox 360. Attempt making use of repair guides should you be not sure about something.
5- Cleaning the GPU and CPU.
It is actually one of the most crucial and result oriented phase of red ring of death error removal procedures. Clean the GPU and CPU with care. But special care would be to be observed as the GPU and CPU are the core parts of Xbox 360.
6- Applying Arctic Silver
Just after cleaning take some arctic silver thermal compound and apply pretty gently over GPU. It’s going to take about 15 to 20 minutes to completely set down the compound.
While installing back start off the reverse process to get every thing fitted back in its actual position. Carefully follow each and every step and total the installation. Take up your time and do each and every step with shear concentration ensuring every thing placed at its suitable position. Turn on the Xbox 360, WOW its working! The total procedure of ways to fix red ring of death error described here is aimed to assist unskilled men and women for fixing the problem.
Tags: