Today, a lot of homes own garage door units that have infrared sensors installed. These sensors are positioned near the bottom of each side’s frame. They are actually a safety precaution should something cause the beam to break as the unit closes. When those sensors are damaged, it will prevent the unit from entirely closing, thus the need to get replacement sensors. The following will discuss the steps in repairing garage door sensors.
To first step is to test the existing sensors to be really certain that nothing is blocking them. In certain cases, loose wiring as well as dirt in the lenses can cause for the sensor to malfunction. Before you even decide to go and purchase a new one, try to see if your present sensors can still be fixed. If you have established that a sensor replacement is the only way to solve the problem, you can visit a home improvement in your area to search for various garage door sensors being sold.
After you have bought a new sensor, you would need to install it in your garage. To begin with, turn off the power of the opener and uninstall the sensors. To remove them, you normally just unscrew the nuts or screws or that put the sensors in place. Upon removal of the old sensors, place the new sensor exactly in the same spot where you took out the old one. You need to tighten the all screws and nuts to make sure that their placement is proper and leave room for adjustments if necessary. The next step is to reconnect all the wires.
After the wires have been reconnected, you will then need to align the garage door sensors. You can do that with the use of any piece of string or measuring tape and then you can make the necessary adjustments. After that, you have to check each sensor’s position to make sure that they did not move. Turn the power on for the garage door opener and test how the door closes. You could put your hand on the sensors and see how it works. When the unit stops and opens accordingly, it means that you have installed the sensors properly.
When you encounter any issue beyond anything that you can handle, it is also a good idea to get a professional’s help to support you with the installation. A technician who focuses in this type of work has deep knowledge about garage door repair and is able to make assessments of any potential trouble such as the proper functioning of garage door sensors.
Dan Pevney has been providing helpful information regarding Garage Door Edison for many years. His expertise is the result of years of hands on experience in the garage door business. If you are having trouble with your door and would like some help he recommends giving Garage Door Repair Edison a call.
Tags: