The GoldenRod Dehumidifier is definitely the only one of its kind. When you first look upon one, you would think that it’s a little portable fluorescent light, but it is actually a dehumidifier. Have you ever heard or seen one? What you will be reading in this article is the what, how, and why you should consider getting one.
So, just how would you think this dehumidifier rod would work? Well, it is rather simple if you think of it. When you have connected the rod, it will start to heat the surface close to 150 degrees Fahrenheit. After the rod has reached that heat range, the air around the rod will quickly get hotter, and also the air around that air, will begin to get warmer, this is called heat expansion. It’ll continue that process until all damp air is gone.
So what can this dehumidifier rod avoid by extracting high humidity air from an area. It’ll prevent every of the following from happening: 1) mildew 2) mold 3) condensation 4) corrosion 5) rust. With all of those not taking place in the area, all of the applications, equipment, vehicles, or objects lasts longer. Plus when you breath the air it will be better for you.
So the GoldenRod Dehumidifier could very well be the safest, easiest, and lowest maintenance dehumidifier that is on the market today. Lowest routine maintenance because it has no moving parts whatsoever, just a rod that does all the work. Snap to install, we’ll be covering this within the next paragraph. Safest, again no moving parts, as well as the rod does not get hot enough to begin any fires, or burns.
There are two options – use the bracket which is provided, or have it free standing. The freestanding one is perhaps the faster and easiest, but not the most effective with decreasing the humidity level. For the freestanding, all you’ve got to do is put the rod on the floor and hook it up. For the mounting of the bracket, you must pick a place that is near the ground and horizontal, it has to be there otherwise this will likely not work properly, because heat rises. Then sew in the bracket with the stain steel sews which are provided, then snap the rod into place, plug-in. Before you mount the bracket though, ensure the room has enough ventilation for the cold damp air to escape.
The expense of using a GoldenRod the dehumidify for a room can cost you less than using a typical light bulb! For running a light bulb, it requires around 75 to 100 watts. For just one rod to cover 100 cubic feet, all that is required is 12 watts (this is the smallest rod). For just one rod to cover 500 cubic feet, all that is required is 38 watts (this is the biggest rod). So, compare that to other bigger, bulkier dehumidifiers that have moving parts, and cost a lot more from the start.
Tags: